Inner Structure - various updates

This distorted photo above shows the space that between the lower nose cut and the picture that follows.  Getting the inner structured install is going to be a challenge.

Sizing up the new inner structure.  While it is not that same as the original in shape, it will serve the purpose. I will document my steps once I have both pieces installed.

Inner Structure from the inside

 Here is a view from the inside.

Inner structure from the side view

Repairing mount for Inner Structure

I cut out the lip where the inner structure is mounted.  I used my plasma cutter as I was majorly frustrated from removing the spot welds to the valance in the front.  So, I welded in and filed down the new replacement piece.

Here is why I used my plasma cutter to originally remove my inner support panel. As you can see, the section was really rusted up due to the prior crash.

Rust and damage