Photo update for today

This is just pictures of the things that I worked on today, without much explanation. Removal of partial front panel, removal of doglegs (passenger fender) and final paint removal on front Porsche Fuchs wheel.

Fuchs Wheel Polishing

I am looking to polish a set of Fuchs wheels, but I am looking for an extension shaft for my standard grinder/polisher.  If you know where this exist, please let me know.

Inner Structure - various updates

This distorted photo above shows the space that between the lower nose cut and the picture that follows.  Getting the inner structured install is going to be a challenge.

Sizing up the new inner structure.  While it is not that same as the original in shape, it will serve the purpose. I will document my steps once I have both pieces installed.

Inner Structure from the inside

 Here is a view from the inside.

Inner structure from the side view

Repairing mount for Inner Structure

I cut out the lip where the inner structure is mounted.  I used my plasma cutter as I was majorly frustrated from removing the spot welds to the valance in the front.  So, I welded in and filed down the new replacement piece.

Here is why I used my plasma cutter to originally remove my inner support panel. As you can see, the section was really rusted up due to the prior crash.

Rust and damage

A-Pillar/Front Valance connection

I am currently researching where this tab connects when rebuilding the front pillar. I've examined the old one removed and it doesn't seem like this existed on the original design.   If you know how this connects, please comment to let me know.